Troubleshooting – Power Off – 10 Simple Steps







Power Off Theory

  1. With the printer TURNED ON
  2. Take cartridge out and close the door . (the one thats not recognised)
  3. Turn Power OFF AT THE WALL (Power point)
  4. Leave off for three to five minutes
  5. Turn Power ON
  6. Engine will run in most printers, when it stops open door
  7. Printer should now be looking for cartridge
  8. Reinstall cartridge
  9. Close door
  10. Cartridge should be accepted at this point


The above is provided for information purposes only. CartridgeMate does not make any representations or guarantees (express or implied) as to the accuracy, currency or authenticity of the information provided. CartridgeMate assumes no liability or responsibility for an errors

Comments are closed!

Receive monthly recommendations right in your inbox.
2017 (C) All rights reserved.
buy accutane buy xanax online buy codeine adderall onlinebuy ambien phentermine online vicodin online